Central Heating Radiators Wellington
Our team has been installing radiator central heating in Wellington for around 40 years. The central heating radiators are smaller for the same output and boilers can be wall mounted. They are efficient and cost-effective. Natural gas is the most common method of heating water in radiators. Radiator central heating systems compete very effectively with other types of heating systems including heat pumps. They can control heating a particular room, other kinds of heating systems cannot do this. This reduces running costs especially for houses that are not insulated well.
What is the difference between Radiators and Warm Air Central Heating?
Central heating as a form of heating is more expensive than spot heating. Heating one or two rooms is more efficient than heating the whole building when no one is using the rest of it. Radiator system has the ability to control different rooms using a control valve or thermostat. Warm air central heating can be zoned. It is more expensive matching radiator’s price. There is a limit to how many outlets can operate with warm air central heating. With radiators, just one room can be heated. There is very less heat loss with the piping compared to the ducting and less pet damage. The boilers are easy to service.
Servicing of Central Heating Radiators
Radiators should be serviced every two years at least and for best results every year. Servicing should cover the entire system including the radiators, the piping, and the boiler. The water in the system should be treated and topped up and the system bled of air. The insulation piping, boiler, and the gas piping must be checked and tested.
What about the Radiators themselves?
The radiators come in all shapes and sizes and can be from a variety of suppliers. Most are steel but some are aluminum which is more expensive. They contain water with a corrosion inhibitor which is heated. There are ladder like radiators for bathrooms, some have summer mode. It is also connected to electricity the same way as a heated towel rail.
There are different models and sizes of radiator boilers. The boiler is selected by the gas fitter based on the size of the building to be heated and whether it is inside or outside. The boilers are also selected based on price, and they differ in price based on size; internal or external and the efficiency rating of the boiler. Some radiator boiler models are condensing, and some are not. The condensing models are more expensive and less costly to run.
How does a Radiator Heating System Work
The system is always full of water. The thermostat or controller is installed in the hallway. When the temperature falls below the set temperature, the boiler heats water; and it is sent to the radiators. You can set time and days as well. If you do not require a radiator, you can turn it off. You can also turn off the whole system with the controller.
Every two years the system water needs checking and the unit cleaning and pressures checking. The water contains corrosion inhibitor which may need topping up.
If you are looking for ducted central heating in Wellington then click here.