Dishwasher Installations Wellington

We do dishwasher installations in Wellington

We offer dishwasher installation in Wellington. We install both under the bench and free-standing dishwashers. The most common position for a dishwasher is next to the sink where there is access to the sink water supply and waste piping. This is the cheapest installation method too, to save on running pipes.

If there was no previous dishwasher installed, then we need to cut out space for one to install the connections for plumbing and electrical.

Dishwasher Positions

How to Install a Dishwasher where there was none

If there is no space for a dishwasher, this can be a challenge as it may not match up with the cupboard doors. One of the doors can be cut shorter. When space is needed the floor covering is also missing and is needed to have an impervious floor under the dishwasher.

We may need to bring in a joiner to cut the hole. The 500mm older style benches are a good time to go for a new kitchen as installing a 600mm deep dishwasher means the new dishwasher will stick out 100mm and so will need to be a free-standing dishwasher as the under bench models often have no outer skin.

Sometimes cutting a hole in set of cupboards is a lot of work. It depends on your budget allow $1000-2000 unless your willing to go with a temporary job. ie the cupboard door cut in half  and ends of the cupboards not terminated with a stop end and the floor not completed.

We install dishwashers of all brands including BoschMiele, Dish Drawers, AEGSamsungSmeg, and other brands.

Dishwasher Installation Cost

Our dishwasher installation cost varies depending on the type of fitting required.

Most common dishwasher installation is one where space for one is there. It also has the valves and waste connection. So it is a basic hook up and test after unpacking the dishwasher.

The second type is there are no valves or waste connection or holes for the hoses. This is also a quick install if the sink has a bench-mounted tap. As the plumbing is all under the sink.

Straight Swap

In this dishwasher installation, the water connections and waste connection are already there. Hose holes and the space for the dishwasher are there. We will disconnect the old dishwasher and remove it from the area. We will unpack, connect and test the new dishwasher.

Fitting Dishwasher Connections

There is no dishwasher, thus new dishwasher will be installed. The hole is there and the piping is under the bench, but there are no connections or holes for the dishwasher hoses. The water connection needs fitting to plumbing under a bench mounted tap. We will change waste trap needs for dishwasher connection. The holes need drilling for the hoses. Space and hot points are already present. We will connect and test the dishwasher.

dishwasher installation Wellington NZ

Fitting Dishwasher Connections

There is no dishwasher, thus new dishwasher will be installed. The hole is there and the piping is under the bench, but there are no connections or holes for the dishwasher hoses. The water connection needs fitting to plumbing under a bench mounted tap. We will change waste trap needs for dishwasher connection. The holes need drilling for the hoses. Space and hot points are already present. We will connect and test the dishwasher.

Installing Dishwasher Piping

Our experts can install piping for the dishwasher under the sink. Space near the cupboard next to the sink can be utilised in most dishwasher installations. We can also replace or fit new taps for the ease of water supply in the kitchen. We change the trap for one with a dishwasher connection. We can also drill holes for hoses. Install a hot point for the dishwasher in the cupboard adjacent.

Call us on 0800 484 353 to install dishwasher in Wellington at affordable rates.