You probably didn’t think that plumbing and Gasfitting could save you money, but energy is expensive and these trades are responsible for installing and maintaining appliances that use lots of energy. If we ensure efficient and well maintained appliances are used then you can save lot of money over the years.
Energy we can save is for water heating, space heating, cooking, and lighting,
- Upgrading your hot water pressure can cost around $600 per year in increased energy costs due to more hot water used. A water efficient shower head will reduce that bill around $350 year.
- A situation where a gas storage water heater was considered instead of a continuous flow would save money where a lot of hot water was used. If only a small amount of hot water is used then a continuous flow will be cheaper to run due to no heat loss.
- Use of a conventional water heater costs around $1500 per year to run. Installing a shower heat recovery system will save money.
- Heat pump water heaters have around a three to five year payback.
- Fit a cylinder wrap if you have an older tank. This insulates your tank and reduces heat loss which is expensive over the long term.
- Insulate the piping around hot water heaters.
- Use small LPG bottles to supply gas to cooking appliances rather that piped gas to the property and save on the line charge if that is the only appliance using gas. It pays to use piped gas if using large quantities as its cheaper.