No Hot Water Wellington

No Hot Water Wellington

Having no hot water at home can be a big problem. We need hot water for daily needs such as taking a shower, washing dishes, and more. It is one of the basic needs of every household as well as commercial property. No hot water is one of the worst things a homeowner can face.

Reasons for No Hot Water

The basic reason for no hot water can be the fuse switched off. You should check the fuse and switch it back on if it is off. This happens with almost every kind of water heating system. Other reasons for no hot water include hot water cylinder blown out, thermostat blew off or pilot light went out. In some cases, the problem of no hot water can be due to the water not coming out of the hot tap. Sometimes cold water can start coming out of the hot tap.

 

Electric Water Heaters Fault List for No Hot Water

  • If the system has a tempering valve, it could be faulty. Check the outlet at the top of the tank, if it is hot then that tempering valve needs replacement.
  • Does the water heater have power? Check the fuse in the fuse box. If the fuse has failed, reset or replace. There may be a reason for its failure. The element may have failed, or the fuse is old, or there is an electrical fault.
  • The ripple control has failed at the meter board. Our electrician can check all kinds of faults in problems for you.
  • The reset button on some thermostats has tripped – Reset it.
  • The Element and thermostat need replacement. We recommend replacing both as this is the most common fault.
  • Someone used all the hot water – get a bigger tank, change to gas, or cut down the use by using low flow shower roses.
No hot water Wellington element electric
No hot water wellington thermostat

Gas Hot Water Cylinder Fault List for No Hot Water

  • If the system has a tempering valve it could be faulty. If the hot water tank is hot this is likely. Check the outlet at the top of the tank, if hot its likely to be that valve needs replacement.
  • Someone used all the hot water – get a bigger tank, change to Continuous Flow, or cut down the use by using low flow shower roses. 
  • Thermostat is faulty.
  • Burner is faulty.
  • Thermocouple is faulty
  • Pilot is out or faulty.
  • Ventilation or flueing problems.
  • TPR Valve is discharging.
  • Insufficient Gas.

Call Southern Plumbing for no hot water problem, hot water cylinder and other plumbing services – 0800 484 353.