We do dishwasher installations in Wellington

We offer dishwasher installation in Wellington. We install both under the bench and free-standing dishwashers. The most common position for a dishwasher is next to the sink where there is access to the sink water supply and waste piping. This is the cheapest installation method too, to save on running pipes.

If there was no previous dishwasher installed, then we need to cut out space for one to install the connections for plumbing and electrical.

How to Install a Dishwasher where there was none

If there is no space for a dishwasher, this can be a challenge as it may not match up with the cupboard doors. One of the doors can be cut shorter. When space is needed the floor covering is also missing and is needed to have an impervious floor under the dishwasher.

We may need to bring in a joiner to cut the hole. The 500mm older style benches are a good time to go for a new kitchen as installing a 600mm deep dishwasher means the new dishwasher will stick out 100mm and so will need to be a free-standing dishwasher as the under bench models often have no outer skin.

Sometimes cutting a hole in set of cupboards is a lot of work. It depends on your budget allow $1000-2000 unless your willing to go with a temporary job. ie the cupboard door cut in half  and ends of the cupboards not terminated with a stop end and the floor not completed.

We install dishwashers of all brands including Bosch, Miele, Dish Drawers, AEG, Samsung, Smeg, and other brands.

Our dishwasher installation cost depends on the type of fitting that is needed for your particular situation. There are two primary types of installations:

The first and most common type of dishwasher installation is where there is already space available for a dishwasher, along with the necessary valves and waste connection. For this kind of installation, the process is straightforward – we simply need to unpack the dishwasher, hook it up, and perform a quick test to ensure everything is working correctly.

The second type of installation is a bit more involved, as it requires the installation of valves, waste connections, and holes for the hoses. However, if the sink already has a bench-mounted tap, the plumbing can be easily accessed and completed under the sink. This type of dishwasher installation is also relatively quick.

If you want to discuss our dishwasher installation service costs, we recommend that you get in touch with our team of experts. They’ll be happy to discuss your needs and provide you with an estimate for your particular situation. Our team is available to provide dishwasher installation services throughout Wellington.

In this dishwasher installation, the water connections and waste connection are already there. Hose holes and the space for the dishwasher are there. We will disconnect the old dishwasher and remove it from the area. We will unpack, connect and test the new dishwasher.

There is no dishwasher, thus new dishwasher will be installed. The hole is there and the piping is under the bench, but there are no connections or holes for the dishwasher hoses. The water connection needs fitting to plumbing under a bench mounted tap. We will change waste trap needs for dishwasher connection. The holes need drilling for the hoses. Space and hot points are already present. We will connect and test the dishwasher.